Cardboard Display Export Packing Guide: How to Protect Displays, Reduce Freight Waste and Prepare for Retail Delivery
I hope you enjoy reading this blog post. If you are looking for Cardboard Display solutions, feel free to contact us.
Table of Contents
A custom cardboard display can pass artwork approval and structural review, then still arrive with scuffed graphics, bent headers, crushed corners or a set of loose parts that store staff struggle to identify.
For an overseas retail program, damage in transit is only part of the problem. Poor export packing can also complicate receiving, slow down store setup and create avoidable handling work at the destination.
That is why cardboard display export packing should be considered before mass production begins. The way a display is packed affects its folded structure, carton configuration, pallet preparation, receiving process and final assembly in store.
For buyers sourcing displays for the United States, Europe, Australia or other overseas markets, the project brief should go beyond appearance and unit price. It should also address several practical questions:
- Will the display ship flat-packed, pre-assembled or pre-filled?
- Which printed or structural parts require protection in transit?
- What should be packed in each carton?
- Does the shipment require pallet preparation?
- Are there destination, warehouse or retailer instructions to follow?
- What packing evidence should be checked before shipment?
This guide explains how buyers can define those requirements early, compare suppliers more effectively and prepare retail displays for overseas delivery with fewer avoidable risks.
What Is Cardboard Display Export Packing?
Cardboard display export packing is the process of preparing corrugated retail displays for international transportation, destination receiving and eventual in-store use.
It is not limited to selecting an outer carton. A complete packing plan considers how the display will travel, which components need protection, how cartons will be identified, whether pallets are involved and how the unit will be assembled or placed at the destination.
A flat-packed floor display requires a different approach from a pre-filled PDQ unit. A pallet display may need closer attention to handling and loading arrangements. A hook display may involve small accessories that must be kept separate from printed panels. Each format brings its own practical packing questions.
| Export Packing Element | What Buyers Should Confirm | Why It Matters |
|---|---|---|
| Delivery format | Flat-pack, pre-assembled or pre-filled | Determines shipping volume, protection needs and destination labour |
| Inner protection | Printed panels, corners, headers, shelves and accessories | Helps prevent scuffs, crushing and missing components |
| Export carton | Carton size, packed quantity, packed weight and handling suitability | Affects shipment efficiency and receiving |
| Carton identification | PO reference, item details, carton number and destination information where required | Helps warehouses identify and distribute the order |
| Pallet preparation | Pallet requirement, carton arrangement and protective wrapping | Supports handling and shipment organisation |
| Moisture review | Shipping route, storage period and destination conditions | Helps manage risks associated with paper-based display components |
| Assembly support | Instructions, part identification and packing sequence | Makes setup easier and more reliable |
The buyer is not simply ordering a printed display. The buyer is ordering a retail unit that must reach the destination in usable condition and be straightforward to deploy.
Why Export Packing Should Be Planned Before Mass Production
Packing is often discussed after the display has already been designed. By that point, important choices may be harder to adjust. The delivery format, carton arrangement and assembly method can all influence the way the display should be built and supplied.
Packing Decisions Can Affect the Display Structure
A flat-pack display must be designed so that individual parts can be packed compactly and assembled correctly at the destination. Shelves, side panels, headers, locking sections and accessories need to fit into a clear packing sequence.
A pre-assembled display reduces setup work after delivery, but the formed structure generally occupies more space and requires closer attention to internal movement, exposed edges and printed surfaces.
A pre-filled display brings the display and the products into the same transport unit. Product dimensions, unit weight, loaded stability and receiving requirements therefore become part of the packing discussion.
Pallet displays may also require early confirmation of the pallet footprint, overall arrangement and whether the unit will arrive ready for retail placement or require further assembly.
These decisions are easier to manage before production starts, while the structure and packing method can still be reviewed together.
Packing Decisions Can Affect Shipping Efficiency
Packing does not need to be the largest cost item in a project to affect the overall delivery budget.
The following factors can influence shipment efficiency:
- folded display dimensions;
- carton size;
- number of display sets packed per carton;
- carton arrangement on a pallet;
- delivery format;
- handling at the destination;
- assembly work required after arrival.
A compact flat-pack configuration may reduce unnecessary shipping volume when the structure suits that delivery method. But reducing carton volume without protecting printed panels or organising components properly may create a different cost later through damage, confusion or rework.
Buyers reviewing overall project cost should therefore evaluate packing alongside structure, delivery model and destination handling. For a broader cost discussion, see our guide to cardboard display cost drivers
Packing Decisions Can Affect Receiving and Store Setup
A shipment has not fully succeeded simply because it has arrived at the warehouse.
The receiving or store team may still need to:
- identify the correct display units;
- check quantities;
- distribute cartons to the right locations;
- find assembly instructions;
- assemble the display;
- load products;
- position the unit in store according to the campaign schedule.
When cartons are unclear, accessories are mixed without identification or instructions are difficult to find, the display becomes more time-consuming to deploy.
A practical export packing plan should therefore support the full journey from factory packing to retail placement.
What Should Be Included in an Export Packing Specification?
Before mass production, the buyer and manufacturer should agree on the core packing requirements for the project.
This does not need to become an unnecessarily complicated document. It needs to be specific enough for both sides to understand what will be packed, how important surfaces and components will be protected, and what will be checked before dispatch.
| Packing Specification Item | Questions to Confirm Before Production |
|---|---|
| Display type | Is the unit a floor display, pallet display, PDQ, hook display, dump bin or sidekick display? |
| Delivery format | Will it ship flat-packed, pre-assembled or pre-filled? |
| Product loading | Will products ship separately or inside the display? |
| Packed components | What parts are included in each carton? |
| Printed-surface protection | How will visible graphics be positioned and protected? |
| Quantity per carton | Does one carton contain one full display set or several sets? |
| Carton identification | What buyer, product, PO or carton references are required? |
| Pallet requirement | Will the cartons be palletised, and has the buyer supplied any instructions? |
| Assembly support | Are instructions, part labels or reference images required? |
| Destination requirements | Has the buyer shared any retailer or warehouse receiving instructions? |
| Approval evidence | Which photographs or packing confirmations will be reviewed before shipment? |
The right packing specification is shaped by the actual project. It should not be selected automatically from a previous order or left until the goods are already finished.
Start With the Delivery Format: Flat-Pack, Pre-Assembled or Pre-Filled?
The delivery format sets the direction for the packing plan. Each option has a different impact on carton space, transit protection and the work required after arrival.
This section focuses on packing implications. For a broader comparison of rollout models and retail execution, read our guide to flat-pack, pre-assembled and pre-filled display models.
Flat-Pack Displays
Flat-pack delivery is often suitable for export orders because the display components are packed before assembly, helping to reduce unnecessary shipping volume where the structure allows it.
For buyers, the key questions are practical:
- Are visible printed panels arranged to reduce rubbing during transit?
- Are shelves, headers and accessories organised clearly?
- Is it easy to identify one complete display set?
- Are assembly instructions included where needed?
- Can the receiving or store team assemble the unit without confusion?
Flat-pack delivery works well when the structure is easy to understand and the carton arrangement supports the assembly process rather than complicating it.
Pre-Assembled Displays
A pre-assembled display arrives with more of the structure already formed. This can reduce setup work and help maintain consistent presentation across a retail programme.
The trade-off is that a formed unit typically occupies more space and may need more careful internal protection. Buyers should review:
- carton fit;
- movement inside the carton;
- exposed corners and edges;
- headers and shelves;
- contact between printed surfaces and packing materials;
- handling during unloading and unpacking.
Pre-assembled delivery can be appropriate when convenience at the destination is more important than achieving the smallest possible shipping volume.
Pre-Filled Displays
A pre-filled display ships with products already positioned within the display unit. This can support faster placement in store, but it also requires tighter coordination during development.
The project team should review:
- product dimensions and unit weight;
- product layout inside the display;
- structure under loaded conditions;
- movement during transit;
- pallet handling;
- receiving and placement requirements.
In this format, product loading and display packing are inseparable. Both need to be planned together.
| Delivery Format | Main Packing Priority | Main Buyer Consideration |
|---|---|---|
| Flat-Pack | Compact carton, protected panels and clear component organisation | Freight efficiency and assembly accuracy |
| Pre-Assembled | Internal stability and external protection | Easier store setup and transit protection |
| Pre-Filled | Loaded structure, product stability and handling plan | Faster rollout with closer coordination |
Inner Protection for Printed Panels, Corners, Headers and Loose Components
A cardboard display must arrive looking presentable as well as standing correctly. Its branded panels, shelf fronts, header and visible edges contribute directly to the appearance of the promotion in store.
Inner protection should therefore be planned around the parts that matter most to both appearance and function.
Protect Visible Printed Surfaces
Visible printed panels can be marked when components move against one another or contact rough surfaces inside the carton during transport.
This deserves particular attention where the display uses:
- large branded front panels;
- dark or visually sensitive artwork;
- prominent promotional graphics;
- visible side panels;
- printed headers;
- surface finishes that require careful handling.
The packing review should establish:
- whether visible printed panels come into direct contact with one another;
- whether separation is needed between selected components;
- whether the carton limits unnecessary movement;
- whether the chosen finish affects handling requirements.
The aim is not to add packaging without purpose. It is to protect the areas that shoppers and retailers will see first.
For further discussion of surface options, refer to our guide to cardboard display finishes and durability options.
Protect Corners, Shelf Lips, Headers and Bases
Certain areas of a display are naturally more exposed during transit. Even when damage does not prevent assembly, it may still make a unit unsuitable for a branded retail promotion.
| Display Area | Potential Packing Concern | What to Review |
|---|---|---|
| Exposed corners | Compression or impact damage | Carton fit and protection method |
| Shelf lips | Bending or scuffing | Shelf placement and separation |
| Header cards | Creasing or crushing | Position inside the carton |
| Side panels | Rubbing or visible surface marks | Panel arrangement and contact control |
| Display bases | Edge damage or deformation | Support and carton configuration |
| Hook or accessory areas | Contact damage or missing parts | Separate organisation and identification |
A packing plan should identify these sensitive areas early and explain how they will be handled in the packed unit.
Organise Components for Receiving and Assembly
Custom displays frequently include several separate parts:
- base panels;
- shelves;
- side panels;
- headers;
- hooks;
- locking components;
- accessory packs;
- assembly instructions.
For flat-pack projects in particular, the receiving team should be able to understand what is inside each carton without opening several boxes and searching for missing pieces.
Where suitable for the project, carton organisation may include:
- one clearly identified display set per carton;
- separate packing for small accessories;
- a component list;
- visible assembly instructions;
- simple part identification for similar-looking pieces.
| Common Problem | Typical Cause | Packing Review Action |
|---|---|---|
| Scuffed graphics | Printed components move against one another | Review separation and carton fit |
| Crushed corners | Exposed edges receive pressure or movement | Review positioning and protection |
| Bent header card | Header lacks support in the carton | Confirm header packing position |
| Missing hooks or small parts | Accessories are not clearly grouped | Use identified accessory packing |
| Slow assembly | Parts or instructions are unclear | Provide assembly guidance and part identification |
The right component arrangement protects the display while making the work at the destination more straightforward.
Export Carton Planning: Dimensions, Pack Quantity, Strength and Identification
The export carton sits at the centre of the delivery process. It holds the display during transport, carries the information required for receiving and influences how the order is handled after arrival.
For that reason, it should be reviewed as part of the display project rather than treated as an interchangeable outer box.
Carton Dimensions Should Support Protection and Efficiency
The appropriate carton size depends on:
- the folded or assembled display dimensions;
- the number of units or component sets packed together;
- any required inner protection;
- accessories or assembly materials;
- whether pallets will be used;
- the buyer’s handling and receiving requirements.
Excess space inside a carton may allow components to shift during transportation. A carton that is too tight may place pressure on sensitive parts or make unpacking unnecessarily difficult.
The objective is not to reduce every carton to the smallest possible size. It is to find a configuration that supports:
- suitable protection;
- efficient packing;
- practical handling;
- clear receiving;
- appropriate pallet or shipment planning.
Buyers should also confirm whether each carton contains one complete display set or components for several units. That decision should reflect how the order will be distributed and assembled after arrival.
Carton Strength Should Match the Actual Project
Carton requirements vary according to what is being packed and how the order will travel.
A flat-packed empty display, a larger floor unit, a pre-assembled display and a display shipping with products inside do not necessarily require the same outer-carton solution.
Factors to review include:
- packed contents;
- packed weight;
- stacking arrangement;
- delivery format;
- pallet requirement;
- handling route;
- storage considerations;
- destination instructions provided by the buyer.
Instead of assuming that one carton construction is right for every export order, buyers should ask how the selected carton approach relates to the specific display and its expected handling conditions.
Carton Identification Should Support Receiving
Carton identification should reflect the buyer’s actual receiving process. Retailers, distributors and warehouses may request different information or formats.
Before production, it is useful to confirm the following:
| Carton Information | What to Confirm |
|---|---|
| Buyer or project reference | The agreed order or campaign reference |
| PO or item reference | Buyer-supplied information where applicable |
| Display type | Floor display, pallet display, PDQ, hook display or another format |
| Quantity per carton | Number of units or complete sets packed inside |
| Carton number | The carton sequence within the shipment |
| Destination reference | Destination or warehouse identifier where required |
| Handling information | Any agreed orientation or keep-dry instruction |
| Assembly reference | Whether instructions or component information are included |
Where a retailer or distribution centre supplies its own carton-labelling instructions, these should be shared with the manufacturer before final packing details are approved.
Palletisation and Container Loading: Plan for Handling as Well as Freight
For larger export orders, carton packing is only one part of the delivery plan. Buyers may also need to determine whether the shipment will be palletised and how the cartons will be arranged for handling and receiving.
Why Pallet Planning Matters
Pallet preparation can influence:
- carton stability;
- loading and unloading;
- warehouse receiving;
- onward distribution;
- protection from avoidable movement;
- overall shipment organisation.
A suitable pallet arrangement should help keep cartons stable without creating new risks through unsupported edges, poor stacking or unclear identification.
Pallet planning is especially relevant when:
- the order contains many cartons;
- displays are large or visually sensitive;
- products travel inside the display;
- the destination warehouse has pallet requirements;
- the format is a cardboard pallet display.
What Buyers Should Confirm for Pallet Packing
| Pallet Review Item | Buyer Question |
|---|---|
| Pallet requirement | Does the buyer or destination warehouse require palletised delivery? |
| Pallet dimensions | Has the required pallet footprint been supplied or confirmed? |
| Carton arrangement | How will cartons be positioned on the pallet? |
| Carton overhang | Will cartons remain within the intended pallet footprint? |
| Stacking stability | Is the arrangement suitable for the expected handling route? |
| Protective wrapping | What method will be used to stabilise the palletised cartons? |
| Label visibility | Can carton or pallet information be read during receiving? |
| Destination instructions | Has the buyer provided any warehouse-specific requirement? |
There is no single pallet arrangement that suits every market, retailer or display format. The appropriate method should be determined by the actual order and the destination process.
Container Loading Efficiency Should Not Override Protection
Compact cartons and well-organised pallet arrangements can support more efficient shipment planning. Even so, optimisation should not come at the expense of printed panels, headers, corners or accessories.
A useful review sequence is:
| Planning Stage | Main Question |
|---|---|
| Display structure | Can the unit be packed safely in the selected delivery format? |
| Inner protection | Are the visually and structurally sensitive parts addressed? |
| Carton plan | Does the carton support protection and practical handling? |
| Pallet plan | Can the cartons be moved and identified efficiently? |
| Shipment preparation | Does the packed order follow the agreed specification? |
| Destination execution | Can the buyer receive, assemble and deploy the display as planned? |
This is a more reliable approach than focusing on shipping volume alone.
Moisture and Long-Distance Transit Risk
Cardboard displays are paper-based retail structures. In overseas projects, the route, storage period and destination conditions may make moisture risk worth reviewing alongside the display design and packing format.
Not every order requires the same level of attention. A lightweight empty display intended for a short trial programme is not the same as a large, visually sensitive unit travelling over a longer route or remaining in storage before use.
When Moisture Review Is Especially Relevant
Moisture and storage considerations deserve closer discussion when a project involves:
- long-distance delivery;
- ocean freight;
- extended storage before retail use;
- printed panels where final appearance is important;
- loaded or heavier display structures;
- pallet-based delivery;
- destination conditions or warehouse instructions supplied by the buyer.
The purpose of this review is to identify the practical risks relevant to the order and to agree on a suitable packing approach before dispatch.
Questions Buyers Should Ask
Before approving the packing method, buyers can ask:
- How will visible printed panels and exposed edges be protected during shipment?
- Are there storage or delivery conditions that should affect the packing method?
- Will cartons be palletised, and how will the packed units be prepared for handling?
- Can the supplier provide final packing photographs before shipment?
- Are there retailer or warehouse requirements that should be provided before production?
These questions are more useful than asking for broad guarantees. A professional discussion starts with the display structure, the delivery format and the requirements of the destination.
Packing Risks by Cardboard Display Type
Different display formats bring different packing considerations. The review should focus on the parts and processes most likely to affect the chosen structure.
| Display Type | Typical Packing Concern | What Buyers Should Review |
|---|---|---|
| Cardboard Floor Display | Large printed panels, shelves and base edges may be visually sensitive in transit | Panel arrangement, shelf protection, carton fit and assembly guidance |
| Cardboard Pallet Display | Pallet handling, product load and larger unit configuration require closer planning | Pallet footprint, loading method, wrapping and destination instructions |
| Cardboard Hook Display | Hooks and small accessories may be separated, lost or contact printed panels | Accessory packing, hook identification and panel protection |
| Cardboard PDQ Display | Tray presentation and retail-ready opening may be affected by poor packing | Tray protection, product arrangement and opening instructions |
| Cardboard Dump Bin | Larger folded panels may need organised support inside the carton | Folded structure, carton dimensions and component identification |
| Cardboard Sidekick Display | Narrow structures and attachment areas may need careful handling | Attachment protection, component organisation and carton identification |
TopwellDisplay supplies custom cardboard display formats including floor displays, pallet displays, hook displays, PDQ displays, dump bins and sidekick displays. Linking these product categories from the relevant rows of the table gives buyers a clear path from packing guidance to the display format they are evaluating.
What Buyers Should Approve Before Production and Before Shipment
Packing approval is most useful when it is divided into two distinct stages:
- confirming the intended packing specification before production;
- reviewing evidence that the finished goods have been packed according to the agreed method before shipment.
These steps serve different purposes and should not be merged into one final inspection decision.
Before Mass Production: Confirm the Packing Specification
| Approval Point | Why It Matters |
|---|---|
| Delivery format | Establishes whether the display ships flat-packed, assembled or loaded |
| Carton arrangement | Defines how units and components will be packed |
| Inner protection plan | Identifies how visible graphics and vulnerable parts will be handled |
| Quantity per carton | Supports receiving, distribution and quotation clarity |
| Component identification | Reduces assembly confusion and missing-part risk |
| Pallet requirement | Allows handling and delivery planning before dispatch |
| Carton information | Ensures buyer-required identification can be prepared correctly |
| Assembly support | Confirms whether instructions or part references are required |
Before Shipment: Review Packing Evidence
| Final Review Item | What Buyers Should Check |
|---|---|
| Packed-carton photographs | The arrangement follows the approved packing method |
| Carton-identification photographs | Required information is present and legible |
| Pallet photographs, where applicable | The arrangement and protection are consistent with the plan |
| Component confirmation | Required parts and accessories are included |
| Assembly instructions, where required | Instructions are included and easy to locate |
| Finished-display photographs | Appearance and structure match the accepted project standard |
| Shipment summary | Quantities and packing configuration are confirmed |
This article is concerned primarily with defining the packing plan before production. For a broader review of finished displays prior to dispatch, see our cardboard display pre-shipment inspection checklist.
What Export Packing Information Should Buyers Include in an RFQ?
A well-prepared RFQ gives a manufacturer enough information to consider display structure, packing requirements and quotation scope together.
When an inquiry contains only a general request for a cardboard display quotation, the supplier may need to make assumptions about delivery format, loading, carton organisation or destination requirements. Those assumptions make quotations harder to compare and increase the chance of later adjustments.
Export Packing RFQ Information Checklist
| Information to Provide | Why It Helps the Supplier |
|---|---|
| Product dimensions | Supports product fit and display-structure review |
| Product unit weight | Supports loading and structural planning |
| Product photographs or samples | Clarifies presentation and loading direction |
| Preferred display type | Identifies whether the project involves a floor, pallet, PDQ, hook, dump bin or sidekick format |
| Units per display | Supports shelf, tray or hook arrangement |
| Total order quantity | Supports quotation and packing planning |
| Destination market | Helps guide delivery and packing discussions |
| Preferred delivery format | Clarifies flat-pack, pre-assembled or pre-filled expectations |
| Retailer or warehouse requirement | Identifies any buyer-supplied receiving or labelling instructions |
| Artwork status | Clarifies whether dieline or artwork support is required |
| Sample requirement | Confirms whether structural or printed-sample approval is needed |
| Target launch date | Helps align development, production and delivery planning |
| Main packing concern | Identifies priorities such as shipping volume, appearance protection or store assembly |
Questions Buyers Can Include in the RFQ
Buyers comparing display suppliers may also ask:
- Which delivery format would you recommend for this project, and why?
- How will visible printed panels and vulnerable parts be handled in transit?
- How will components be organised inside the carton?
- Which packing details require buyer approval before production?
- Can packing photographs be provided before shipment?
- What destination or retailer instructions should be shared before quotation?
These questions help reveal whether a supplier is merely pricing printed display units or considering the requirements of the full retail delivery programme.
Downloadable Resource Opportunity
A one-page downloadable resource can turn this article into a practical lead-generation asset:
Cardboard Display Export Packing RFQ Checklist
Recommended fields:
- Company name;
- Contact details;
- Destination market;
- Product dimensions;
- Product unit weight;
- Display type;
- Units per display;
- Estimated order quantity;
- Preferred delivery format;
- Artwork status;
- Retailer or warehouse requirement;
- Required launch date;
- Main packing concern.
How TopwellDisplay Supports Export-Ready Cardboard Display Projects
TopwellDisplay is a Shenzhen-based cardboard display design and manufacturing factory supporting overseas retail display projects.
For brands, advertising agencies and procurement teams, a display needs to do more than look attractive in a proof or sample review. It must also be practical to pack, transport, receive, assemble and place in store.
Based on the project information supplied by the buyer, our team can discuss:
- product dimensions and loading requirements;
- suitable cardboard display formats;
- flat-pack, pre-assembled or pre-filled delivery preferences;
- carton packing requirements;
- printed-surface protection considerations;
- component organisation and assembly support;
- pallet packing requirements supplied by the buyer;
- final packing confirmation before shipment.
A floor display for a branded promotion, a hook display for small packaged products and a pallet display for larger-volume retail presentation should not be treated as the same packing project. The most useful discussion begins with a complete brief.
When buyers provide product size, unit weight, order quantity, destination market, artwork status, delivery preference and launch timing, the project can be reviewed around practical requirements rather than assumptions.
For guidance on preparing an effective brief, read our article on how to brief a cardboard display manufacturer.
A Better Packing Plan Protects the Retail Programme
Export packing is not simply the outer carton selected once a display has been produced.
It affects how visible graphics are protected, how cartons are received, how components are identified, how easily the display can be assembled and how smoothly the promotion reaches the retail floor.
For overseas buyers, the right time to discuss packing is before mass production begins, while the delivery format, carton arrangement, protection needs, pallet instructions and destination requirements can still be reviewed properly.
A reliable packing plan is built on clear project information, appropriate protection and agreed approval points—not on broad promises.
Planning a custom cardboard display project for an overseas retail programme?
Send TopwellDisplay your product dimensions, unit weight, target quantity, preferred display type, destination market, artwork status, delivery preference and required launch date. Our Shenzhen team can review your requirements and discuss a practical export packing approach before production begins.
FAQ
How are cardboard displays usually packed for overseas shipping?
The packing method depends on the display structure, delivery format, product-loading requirements and destination instructions. Many cardboard displays are shipped flat-packed where this supports efficient transportation and practical assembly. Other projects may require pre-assembled or pre-filled delivery. Buyers should confirm protection, carton organisation, pallet requirements and assembly support before production.
Is flat-pack shipping always the best option for cardboard displays?
No. Flat-pack delivery may reduce shipping volume and storage space, but it requires assembly at the destination. Pre-assembled delivery may be more suitable where faster setup or consistent presentation is a priority. Pre-filled delivery may support rapid retail placement but requires closer coordination of structure, product loading and handling.
How can printed cardboard displays be protected during transportation?
Buyers should review how visible printed panels, side panels, headers, shelf lips and corners will be positioned and protected inside the carton. The appropriate method depends on the display structure, selected surface finish and delivery format.
What should buyers confirm about export cartons?
Buyers should confirm the carton arrangement, number of display units or sets per carton, component organisation, buyer-required carton information, handling instructions and whether pallet packing is needed.
Do cardboard displays require moisture review for overseas delivery?
Moisture review may be appropriate where a project involves long-distance transportation, extended storage, visually sensitive printed displays, loaded structures, pallet-based delivery or destination conditions supplied by the buyer. The suitable approach should be discussed according to the actual project.
Planning a Custom Cardboard Display Project?
Send us your product dimensions, unit weight, target quantity, retail channel, and reference images. Our team can help review the structure, sampling plan, packing method, and production requirements before quotation.
Contact Us Today
Please let us know your request, we will get back to you within 24 hours.
- info@topwelldisplay.com
- +86 18100275019
Leave Your Message for TopwellDisplay
After your message is successfully submitted,we willl text you back if necessary.